Gps2aprs
Zur Navigation springen
Zur Suche springen
gps2aprs -h
Read serial GPS and make normal/compressed/mic-e Beacon as AXUDP or monitor
-0 <s> standing Beacon Time in Seconds (180)
-a altitude OFF
-b <s> driving Beacon Time in Seconds (15)
-c <commentstring> APRS Comment (max 40 char)
insert time hhmmss: \\h
insert time ddhhmm: \\z
insert file : \\:filename:
insert \\ : \\\
double all \ to pass thru bash eg. \\\\h
-d <x> Destination Call SSID 0..7
-D DAO Extension on for 20cm Resolution
-f <x> format 0=normal 1=compressed 2=mic-e (0)
-g <km/h> min. Speed for driving Beacon Time (4)
-h this
-I <mycall> Mycall with SSID like NOCALL-15
-i <icon> 2 Icon chars "/-" (House), "/>" (Car)...(//)
-k Speed/Course OFF (not in mic-e)
-l <n> every n Beacons send one with Comment
-L <filename> Append raw GPS text to this File
-m <x.x.x.x:destport> use Monitor UDP format :port for localhost
-N <x.x.x.x:destport> send Position AXUDP every 2s eg. to aprsmap
-n <s> Beacon Time in Seconds to -N destination (2)
-r <x.x.x.x:destport> send AXUDP (to kiss-TNC or TCPKISS via udpflex,
to afskmodem or via aprsmap or udpgate to TCP)
-s GPS Checksum check OFF
-t <tty>:<baud> (/dev/ttyS0:4800)
-u abort, not retry until open removable USB tty
-v verbous
-w <viapath> via Path like RELAY,WIDE1-1