Profile

profile -h

Geoprofile from Position A to Position B
 -A <m>                            Antenna A over ground [m] (10)
 -a <lat> <long> | [locator]       Position A lat long (degrees) or qth locator
 -B <m>                            Antenna B over ground [m] (10)
 -b <lat> <long> | [locator]       Position B lat long (degrees) or qth locator
 -C <filename>                     Colours File Name (red green blue 0..1023)
 -c <filename>                     csv File Name
 -F <font>                         Font Size (1) 1: 6x10, 2: 8x14, 3: 10x20
 -f <MHz>                          Frequency for Fresnelzone (145)
 -g <gamma>                        Image Gamma 0.1..10 (2.2)
 -h                                this
 -i <filename>                     Image File Name
 -k <factor>                       Kernel diameter of fresnel zone to full diameter (0.6)
 -L <text>                         Label, apply after -a and -b
 -p <pathname>                     folder with /srtm1 /srtm3 /srtm30
 -R <refraction>                   same but earth curvature added to Ground
 -r <refraction>                   0.0(vacuum)..1.0(earth is a disk) (0.25)
 -w <m>                            Wood higth (0) (from 1000 to 2000NN reduced till 0
 -x <size>                         Image size (600)
 -y <size>                         Image size (400)
 use -a and -p Parameter for Altitude as String output